Dimensions pile:
In principle, all external pipe diameters are applicable. The most common pipe diameters are: ø273, ø324, ø356, ø406, ø456, ø508, ø556, ø610, ø711.
The foot diameters can be made 50 cm larger than the pipe diameters in relation to the base.

Length pile:
Up to approximately 35 to 40 meters. The pile will be jettisoned to ground level.

Reinforcement:
The piles are provided with prefabricated reinforcement baskets. From quality aspect, they are reinforced along the entire length.

Concrete:
The piles are poured on site using concrete directly from the plant. All strength classes can be applied here.

Soil mechanical bearing capacity:
NL: The bearing capacity is calculated in accordance with current EC, NEN and CUR standards.
B: The bearing capacity is calculated in accordance with current EC, NBN and CUR standards.

Methods:

• A steel auxiliary pipe, equipped with a base plate, is placed at ground level;
• The tube is inserted by piling on the top of the tube;
• Upon reaching the desired pile tip level, the reinforcement is placed in the pipe after checking that the pipe is dry and free of soil;
• The tube is filled with concrete mortar
• Depending on the pile base to be made, the pile tube is raised over a limited height using a ring vibrator;
• The tube is backfilled with concrete and hermetically sealed at the top, which is then driven back to just above the pile tip level;
• The tube is then fully retracted, forming the final pile .
• The rig can be moved to the next pile location.

Advantages:

• Good application in erratic soil layers;
• Quick Process;
• High load-bearing capacity allowable even in weak soil layers;
• Extremely suitable as a pressure and tension pile;
• High degree of compaction of concrete by vibratory drawing.
• No soil removal. Soil is pushed away laterally;
• No extreme inconvenience from supply materials.

Applicable base:
SuperVibrex piles can be used in virtually all bases.

Inclinations:
Up to 4:1 forward and 2:1 backward.
Work space:
To perform the SuperVibrex pile one must have adequate clearance height and space.

Abutments:
The piles can be installed at a distance of approximately 0.9 m perpendicular to the abutting wall. In the case of recessed corners it is of course more.

Executable rigs:
Fundex F12S, F12SE, F15, F16, F2800, F3500.

Dimensions rigs:
Depending on type rig. Most common; siding approximately 7 x 12 m. Height rig approximately 35 m.
Built-up weight variable from approximately 50 to 120 tons.